HostedPowerDialer.com

September 14, 2010

Motion Sensing Sprinkler: Information About Different Kinds Of Animal Repeller

Also called the motion activated sprinkler, used in lots of homes around the world to repel irritating and unwanted animals and wild birds like deer, kitty, raccoon, dog, squirrel and pigeon. These pets or animals really like to visit our homes every day and poo everywhere, in the grass, in the vegetable garden, in the swimming pool, they feed on the trash can and often damage property. Keeping them at bay is not an easy task, it’s nice someone created the motion sensor sprinkler. As we all know, most animals really hate water, even the great lion hates it, so they integrate it into a sensor and made the automatic animal repellant. It works by sensing the presence of an animal by means of the built-in electronic motion sensing unit and chase them out with a quick harmless burst of water. It is safe, effective and humane.

Use it to secure your grass and flowerbed, to defend your fishponds from predator. This will save you time and hard earned money from destruction to premises made by curious intruders including raccoon and kitty who loves to dig and consume anything they can come across. Position the sprinkler to watch over those areas that are most valuable to you, freshly planted crops and newly seeded yards seems to attract animals as soon as you wrap up the job. The motion detector sprinkler sees animals as small as squirrels but permits some wild birds to surf around.

It is easy to setup, once you taken it out of the box all you need to do is mount the battery that will power its sensor and electronic circuit then attach the device to the hose, it has a threaded inlet piping that matches into a standard garden hose by turning clockwise to tighten it up. When connected, push the stake into the soil using your foot to fix it in place and position it to the area where you wish to protect and set the nozzle head spray area and you’re done. You can test if it’s functioning by waving your hands in front of it, if you installed it properly it will automatically spray a burst of water for a couple of seconds and stop all set for the next action. It can detect any activity within its range usually medium to large animals and birds.

There are many types of motion pet deterrent, there’s one that utilizes high-pitched sound and air burst to frighten out kitties. This unit is good only for in house use in which you can’t use water. Instead it utilizes a special canister which is loaded with pressurized gas and is readily offered in the market nowadays. It is effective up to 3 feet away and it’s odorless and safe. As opposed to motion sensor water sprinkler which needs a fixed source of water, it doesn’t need to be connected to a garden hose, thus, you can position it anywhere.

There’s a much simpler type of animal repeller, one that doesn’t require water or pressurized air to work and almost servicing free. It uses only an ultrasonic sound to scare away animals. It employs the exact same principle as the other two products but without the inconvenience of the hose and the expensive gas cartridge to purchase. All you need to do is to ensure that you replace the battery once drained. This kind of solution is good both for inside and outdoor use and normally has a 4,000 square feet range. It has a weatherproof body construction so you can leave it outside without worrying of getting wet in the rain.

One of the trusted brands when it comes to movement sensing sprinkler is the Scarecrow motion activated sprinkler. It finds and sprays animals in a 1,000 square foot area. It uses a movement detector sensor and run by a 9-volt battery pack. It’s the most reliable method in repelling all kind of animals including birds.

For more information about the different kind of motion sensor sprinkler including the Scarecrow motion activated sprinkler just simply click on the highlighted hyperlinks and get the best prices.

June 20, 2010

A Guide To Setting Up A Flap Wheel Head After The Molder

Filed under: sales tools — Tags: , , , , , , , , , — John Martin @ 3:34 am

Sanding your molding with a flap wheel head after the molder will help decrease surface markings and aid in creating a better product. In working with molders it is critical to keep spindle tooling clean, sharp, and well balanced. With this combination and making sure to not over drive feed speeds a decent profile can be produced on most molders.

The next step is proper sanding of the material after the shapes have been created. I have found only two methods that will work well for sanding profiled material. One is using a shaped wheel that matches the profile of your product. These shaped wheels are similar in nature to a grinding wheel. These shaped wheels can remove a fair amount of material and will help with removing tooling marks but will not denibb your surface nor help with color balance. You will also need a head to match each profile you want to create.

Enter the flap wheel head. Flap wheel heads are designed to be flexible in order to conform themselves to the shape being sanded. This has the unique benefit of very small changes in machine or head settings to accommodate different profiles. When sanding molding with a flap wheel head you must understand that only a small amount of material is going to be removed. Sanding in this way will do no harm to your profile but only a limited amount of tooling marks will be removed. If you start with good tooling and produce a good clean molding cut, the flap wheel sanding will finish sand your product to the point of being ready to apply stain or primer.

The flap wheel sanding process, will denibb your product. This is to remove the small fibers that pop up when sanded in any other way or when any type of chemical or water is applied to the surface of the material. These fibers if not removed will raise up and set in a dried position causing a rough primer or stain and seal coat. This will require additional sanding time being needed between coats to achieve a smooth top coat.

Using a flap wheel head can remove the fibers and therefore reduce the total sanding time in between coats. It also comes with the benefit of ensuring uniform pore opening in the materials. This means the color will be balanced across the surface.

Building your own flap wheel head as an attachment on the out feed end of the molder could be your solution. With today’s availability of inexpensive motors and controllers give it consideration. In most cases a little fabrication work to mount a motor or two with heads on the out feed end of your molder is not difficult to do. You will want to make sure the heads can be adjusted up and down and also the ability to tilt the head can be very useful. Up and down adjustment is a must to accommodate different thicknesses of material. The ability to tilt your heads will help when running a profile that is considerably thicker along one edge than the other.

Just keep in mind the need for more heads as feed rates increase. It will take approximately two heads for up to 20 feet per minute feed rates. Using four heads will get you up to approximately 60-70 feet per minute feed rates and still give good quality sanding. You will also want to make sure the heads are counter rotating. Counter rotation insures that one direction of spin will lift the fibers while the other direction of rotation successfully removes the lifted fibers.

The end result is a better finish that will have needed less sanding between the coats, and less chemicals to reach that result.

Flap Wheels provides a range of tools to help you achieve the best results possible. Take a look today to find flap wheel heads and much more!

Powered by WordPress